Description

375FE-1 Fixed Adamas® | OD Parachord | Drop-point

A new era of Adamas® is here. The last thing your loadout needs is another heavy piece of gear to weigh you down, which is why the 375FE-1 Fixed Adamas® has been re-engineered to be stronger than ever before without adding weight. 375FE-1 Fixed Adamas® machined from CPM-CruWear tool steel, this blade brings upgraded corrosion resistance and toughness front and center. In addition to the knife itself, the sheath has been redesigned to affix with low profile MALICE CLIPS®, allowing users to carry the knife on MOLLE® webbing or a standard duty belt. Modify with the times, and carry with confidence.

• Open Length
  • 9.17” | 23.29cm
• Blade Length
  • 4.2” | 10.67cm
• Blade Thickness
  • 0.17” | 4.32mm
• Handle Thickness
  • 0.17” | 4.32mm
• Mechanism
  • Fixed Blade
• Blade Style
  • Drop-Point
• Handle
  • Cerakote®
• Blade Finish
  • Cerakote®
• Blade Color
  • Flat Earth
• Ambidextrous
  • Yes
• Handle Material
  • Cerakote®
• Handle Color
  • Flat Earth
• Lanyard Hole
  • Yes
• Blade Steel
  • CPM-Cru-Wear® Tool Steel (63-65HRC)
• Weight
  • 5.66oz | 160.46g
• Sheath
  • Ranger Green PIM
• Sheath Weight
  • 1.11oz (31.47g)

Use & Care

• Proper care and regular maintenance help make your Benchmade knife yours, for life. Here are some tips for keeping your Benchmade in peak condition
• All steel, regardless of price and grade, can eventually rust, so it’s important to keep your knife dry and lubricated. If spotting or rust occurs, semi-chrome metal polish will often take care of it.
• Dishwashers can cause serious damage that is not covered under our warranty, so make sure to hand-wash your Benchmade under warm water with dish soap only, and dry thoroughly.
• Remember, knives are cutting tools, and you should never use your knife as a pry-bar, screwdriver, chisel, or punch, unless the knife is designed explicitly for those purposes.
• If you choose to sharpen your blade yourself, avoid grinding wheels and other high-powered machinery.
• Handle, pivot, and pocket clip screws may require occasional adjustment using T6 & T10 Torx drivers. We recommend applying a small dab of releasable thread-locker as needed.