Description

535TN-11 Bugout® | Dark Olive Grivory®

Whether you’re drawn to the chassis or paint job mods, or the way a 4WD rig seems to climb up mountains rather than roll, but there’s just something about a custom overland vehicle that connects you with an adventure—much like our outdoors adventurists’ fav: the Bugout®. An ode to these tough and earthy ramblers, the new 535TN-11 Bugout® dons overlanding rig-inspired Dark Olive Grivory handle scales with a black anodized aluminum thumb stud and barrel spacers. Featuring a CPM-S30V steel blade with a Desert Verde Cerakote finish, the 535TN-11 Bugout® loves a good off-road journey.

• Open Length
  • 7.46” | 18.95cm
• Blade Length
  • 3.235” | 8.22cm
• Blade Thickness
  • 0.09” | 2.29mm
• Closed Length
  • 4.22” | 10.72cm
• Handle Thickness
  • 0.42” | 10.67mm
• Mechanism
  • AXIS® Lock
• Blade Style
  • Drop-Point
• Handle
  • Grivory®
• Pocket Clip
  • Mini Deep Carry
• Blade Finish
  • Cerakote®
• Blade Color
  • Desert Verde
• Clip Color
  • Black
• Clip Finish
  • Black Oxide
• Clip Position
  • Tip-Up
• Clip Type
  • Mini Deep Carry
• Ambidextrous
  • Yes
• Handle Material
  • Grivory®
• Handle Color
  • Dark Olive
• Lanyard Hole
  • Yes
• Blade Steel
  • CPM-S30V Stainless Steel (58-60HRC)
• Weight
  • 1.8oz | 51.03g

Use & Care

• Proper care and regular maintenance help make your Benchmade knife yours, for life. Here are some tips for keeping your Benchmade in peak condition
• All steel, regardless of price and grade, can eventually rust, so it’s important to keep your knife dry and lubricated. If spotting or rust occurs, semi-chrome metal polish will often take care of it.
• Dishwashers can cause serious damage that is not covered under our warranty, so make sure to hand-wash your Benchmade under warm water with dish soap only, and dry thoroughly.
• Remember, knives are cutting tools, and you should never use your knife as a pry-bar, screwdriver, chisel, or punch, unless the knife is designed explicitly for those purposes.
• If you choose to sharpen your blade yourself, avoid grinding wheels and other high-powered machinery.
• Handle, pivot, and pocket clip screws may require occasional adjustment using T6 & T10 Torx drivers. We recommend applying a small dab of releasable thread-locker as needed.