Description

539GY Anonimus | OD Green G10

Head into the sticks with the 539GY Anonimus, and you’ll be prepared for every challenge the bush puts in your path. Designed for all-purpose fieldcraft and survival, the low-profile 539GY Anonimus features super-tough CPM-CruWear steel with a tungsten gray Cerakote® finish, durable OD green G10 handle scales, a trigger-inspired finger guard, and a precision-ground striking choil. Rounded out by a Boltaron® sheath with an attachable ferro rod loop, the Anonimus is the perfect off-grid companion to have at your side.

• Open Length
  • 9.83” | 24.97cm
• Blade Length
  • 5” | 12.7cm
• Blade Thickness
  • 0.114” | 2.9mm
• Handle Thickness
  • 0.68” | 17.27mm
• Mechanism
  • Fixed Blade
• Blade Style
  • Drop-Point
• Handle
  • G10
• Pocket Clip
  • None
• Blade Finish
  • Cerakote®
• Blade Color
  • Tungsten Gray
• Ambidextrous
  • Yes
• Handle Material
  • G10
• Handle Color
  • OD Green
• Lanyard Hole
  • Yes
• Blade Steel
  • CPM-Cru-Wear® Tool Steel (63-65HRC)
• Weight
  • 5.94oz | 168.4g
• Sheath
  • Boltaron® With Belt Loop And Attachable Accessory Ferro-Rod Loop
• Sheath Weight
  • 2.56oz (72.57g)

Use & Care

• Proper care and regular maintenance help make your Benchmade knife yours, for life. Here are some tips for keeping your Benchmade in peak condition
• All steel, regardless of price and grade, can eventually rust, so it’s important to keep your knife dry and lubricated. If spotting or rust occurs, semi-chrome metal polish will often take care of it.
• Dishwashers can cause serious damage that is not covered under our warranty, so make sure to hand-wash your Benchmade under warm water with dish soap only, and dry thoroughly.
• Remember, knives are cutting tools, and you should never use your knife as a pry-bar, screwdriver, chisel, or punch, unless the knife is designed explicitly for those purposes.
• If you choose to sharpen your blade yourself, avoid grinding wheels and other high-powered machinery.
• Handle, pivot, and pocket clip screws may require occasional adjustment using T6 & T10 Torx drivers. We recommend applying a small dab of releasable thread-locker as needed.