Description

748 Narrows™ | Gray Titanium | Drop-point

Lean, light, and strong. These are the basic parameters we set for the 748 Narrows™, but there’s nothing basic about this future-forward folder. Coming in at just .28 inches thick, the titanium handle of the 748 Narrows™ is the slimmest full-size frame we’ve ever built, making it the most pocketable, space-saving large knife in our lineup. Accordingly, we’ve also introduced a new take on the AXIS® lock, eliminating steel liners and omega springs and subbing in a sleek new lock stud and torsion spring assembly. With the benefit of a thin M390 drop-point blade and the pop of blue hardware, this stylish EDC takes ultralight utility to the extreme.

• Open Length
  • 8.02” | 20.37cm
• Blade Length
  • 3.43” | 8.71cm
• Blade Thickness
  • 0.08” | 2.03mm
• Closed Length
  • 4.58” | 11.63cm
• Handle Thickness
  • 0.28” | 7.11mm
• Mechanism
  • AXIS® Lock
• Blade Style
  • Drop-Point
• Handle
  • 6Al-4V Titanium
• Pocket Clip
  • Mini Deep Carry
• Blade Finish
  • Stonewash
• Blade Color
  • Satin
• Clip Color
  • Blue
• Clip Finish
  • Sapphire Blue PVD
• Clip Position
  • Tip-Up
• Clip Type
  • Mini Deep Carry
• Ambidextrous
  • Yes
• Handle Material
  • 6Al-4V Titanium
• Handle Color
  • Gray
• Lanyard Hole
  • Yes
• Blade Steel
  • M390 Stainless Steel (58-61HRC)
• Weight
  • 2.41oz | 68.32g

Use & Care

• Proper care and regular maintenance help make your Benchmade knife yours, for life. Here are some tips for keeping your Benchmade in peak condition
• All steel, regardless of price and grade, can eventually rust, so it’s important to keep your knife dry and lubricated. If spotting or rust occurs, semi-chrome metal polish will often take care of it.
• Dishwashers can cause serious damage that is not covered under our warranty, so make sure to hand-wash your Benchmade under warm water with dish soap only, and dry thoroughly.
• Remember, knives are cutting tools, and you should never use your knife as a pry-bar, screwdriver, chisel, or punch, unless the knife is designed explicitly for those purposes.
• If you choose to sharpen your blade yourself, avoid grinding wheels and other high-powered machinery.
• Handle, pivot, and pocket clip screws may require occasional adjustment using T6 & T10 Torx drivers. We recommend applying a small dab of releasable thread-locker as needed.